Sonometer Simple Pattern Manufacturer,Supplier and Exporter in India
Product Code : EL-SAW-10639
Quick Answer: The Sonometer Simple Pattern has a wooden resonance box 1140mm long, two 50N spring balances with hooks and two steel wires of 30 swg, 1 metre long.
Last updated: October 2026
Key Features
- Wooden resonance box 1140mm long, 125mm wide and 100mm high
- Two 50N spring balances with hooks at one end of the base
- Two matching wrest pins at the other end
- Three bridges: one large to span the wires and two small for the individual wires
- Two steel wires, 30 swg, 1 metre long
Technical Specifications
| Specification | Value |
|---|---|
| Resonance box | Wood, 1140 x 125 x 100mm (L x W x H) |
| Spring balances | Two, 50N, with hooks |
| Wrest pins | Two |
| Bridges | One large, two small |
| Wires | Two steel, 30 swg, 1 metre |
About This Product
Each steel wire runs from a wrest pin at one end of the base to a 50N spring balance at the other, so its tension can be read directly. The large bridge spans both wires, while the two small bridges are used on the wires individually to change the vibrating length over the wooden resonance box.
Frequently Asked Questions
What wires are supplied?
Two steel wires of 30 swg, each 1 metre long.
How many bridges are included?
Three bridges are included: one large bridge to span the wires and two small ones for the individual wires.
Related: Sound and Wave, Sonometer 3 Wire Pattern and Oscilloscope Dual Trace/Channel.
For a quotation on the Sonometer Simple Pattern, contact Didactic Lab.
