Radius Bending Machine Manufacturer,Supplier and Exporter in India
Product Code : EL-STLE-11249
Quick Answer: The Radius Bending Machine bends reinforcing bar into circular rings without pre-bending the bar end, and is offered in two models with 3 hp two-speed or 5 hp feed motors on a 440 VAC three-phase supply.
Last updated: October 2026
Key Features
- Bends rebar to a radius to make circular rings
- No need to pre-bend the end of the bar
- Hinged guard returns to the closed position after the ring is lifted out
- Drive rollers do not rotate while the guard is open
- For bar grades of 60 or 65 kg/mm²
- Feed rate of 44 or 22 m/min (3 hp model) or 22 m/min (5 hp model)
Technical Specifications
| Specification | Value |
|---|---|
| Feed motor | 3 hp two-speed, or 5 hp |
| Bar grade | 60 or 65 kg/mm² |
| Feed rate | 44 or 22 m/min (3 hp), 22 m/min (5 hp) |
| Power supply | 440 VAC, 3-phase, 50 Hz |
| Dimensions | 1001 × 1050 × 930 mm |
| Weight | 700 kg (3 hp) or 750 kg (5 hp) approx |
About This Product
The machine forms reinforcing bar into rings, and the bar end does not have to be pre-bent first. After a ring is formed, the finished shape is lifted out while the guard hinges open and then returns to the closed position, and the drive rollers stay still while the guard is open. The guard keeps the operator's hands away from the forming rolls.
Frequently Asked Questions
Does the bar end need to be pre-bent on the Radius Bending Machine?
No, the machine bends radius rebar without the need to pre-bend the end of the bar.
What motors are available?
One model has a 3 hp two-speed feed motor with feed rates of 44 or 22 m/min; the other has a 5 hp motor with a 22 m/min feed rate. Both run on 440 VAC, 3-phase, 50 Hz.
Related: Steel Testing Lab Equipment, Stirrup Bending Machine and U Bending Machine.
For a quotation on the Radius Bending Machine, contact Didactic Lab.
.jpg)
